本文二维码信息
二维码（扫一下试试看！）
Effect of Mold Type on Porosity of Carbon Fiber Reinforced Thermoplastic Prepared via Wet Forming Process
Received:July 26, 2022  
DOI：10.11980/j.issn.0254-508X.2023.06.012
Key Words:wet forming process  composite materials  mold  pore
Fund Project:佛山市三水工业园区重大技术攻关项目（2040253000004）。
Author NameAffiliationPostcode
YAN Xin School of Light Industry and Engineering， South China University of Technology， Guangzhou， Guangdong Province， 510640 510640
ZENG Weixin Walkkind Technology， Foshan， Guangdong Province， 528000 528000
WANG Xiwen* School of Light Industry and Engineering， South China University of Technology， Guangzhou， Guangdong Province， 510640 510640
Hits: 1512
Download times: 1143
Abstract:In this study， the effect of 2 molds （matched-die and plate-frame molds） on the pore structure of carbon fiber reinforced thermoplastic （WL-CTP） prepared via wet forming process was investigated. The results showed that the molding time had no effect on the porosity when any mold was used， while the molding pressure affected the porosity. Pores were generated by insufficient deformation of the fiber network due to insufficient molding pressure when using the matched-die mold. In the case of plate-frame mold， pores were generated due to excessive extrusion of the molten preform. At a carbon fiber volume fraction of 50% and molding pressure of 5 MPa， the porosity （13%） of WL-CTP prepared by the matched-die mold was lower than that of its plate-frame molded counterpart （35%）， therefore， the matched-die mold was more suitable for the preparation of WL-CTP with high fiber content.
View Full Text  HTML  View/Add Comment  Download reader