本文二维码信息
二维码（扫一下试试看！）
Research on Foam Forming Technology of Alumina Fiber
Received:September 15, 2022  
DOI：DOI：10.11980/j.issn.0254-508X.2023.03.011
Key Words:alumina fiber  fiber length  fiber content  foam forming  paper sheet evenness
Fund Project:纸基复合材料水基泡沫成型机理研究（项目号：2021A1515010406）。
Author NameAffiliationPostcode
YANG Huikang School of Light Industry and Engineering， South China University of Technology， Guangzhou， Guangdong Province， 510640 510640
HOU Fuqing School of Light Industry and Engineering， South China University of Technology， Guangzhou， Guangdong Province， 510640 510640
DING Nengxin School of Light Industry and Engineering， South China University of Technology， Guangzhou， Guangdong Province， 510640 510640
ZHANG Chunhui* School of Light Industry and Engineering， South China University of Technology， Guangzhou， Guangdong Province， 510640 510640
Hits: 2097
Download times: 1670
Abstract:In this study， alumina fiber paper with low density and excellent evenness was made by foam forming technology， and the construction of alumina fiber foam slurry system and the effects of alumina fiber length and content on foam characteristics and paper sheet evenness were focused. The results showed that the foam slurry system under the combination of polyethylene oxide （PEO） and gemini quaternary ammonium salt （GS） could effectively disperse alumina fiber， and the evenness of the paper sheet after forming was the best. Compared with wet forming， the use of foam forming technology was conducive to the dispersion of alumina fiber， while increasing the fiber content. When the fiber content was 0.2%， the evenness index of the alumina fiber foamed sheet with a fiber length of 36 mm was 109， which was 42% lower than that of the 6 mm alumina fiber wet-formed paper sheet （187）. When the content of alumina fibers was 1.2%， the evenness index of foam-formed paper sheet was 105， which was 44% lower than that of wet-formed paper sheet （187） with 0.2% fiber content.
View Full Text  HTML  View/Add Comment  Download reader