本文二维码信息
二维码（扫一下试试看！）
Failure Analysis and Preventive Measures on the Drive Side of Vacuum Press Roll
Received:March 06, 2021  
DOI：10.11980/j.issn.0254-508X.2021.09.011
Key Words:vacuum press roll  force analysis  linear pressure  shear strength  preventive measures
Fund Project:黑龙江省高等学校基本科研项目（2019-KYYWF-1383，2017-KYYWF-0588）。
Author NameAffiliationPostcode
WANG Zhiwen College of Mechanical and Electrical Engineering， Heilongjiang Forestry Vocational-technical College， Mudanjiang， Heilongjiang Province， 157000 157000
LI Chao* College of Mechanical and Electrical Engineering， Harbin Engineering University， Harbin， Heilongjiang Province， 150001 150001
WU Liying Library of Mudanjiang Medical College， Mudanjiang， Heilongjiang Province， 157000 157000
SUN Fuming Heilongjiang Jiajian Internet Technology Co.， Ltd.， Mudanjiang， Heilongjiang Province， 157000
Machine Repair Branch of Mudanjiang Hengfeng Paper Co.， Ltd.， Mudanjiang， Heilongjiang Province， 157013 		157013
ZHANG Baoyan School of Mechanical Engineering， Jiamusi University， Jiamusi， Heilongjiang Province， 154007 154007
WANG Haixiang School of Mechanical Engineering， Jiamusi University， Jiamusi， Heilongjiang Province， 154007 154007
LI Zhiqiang Machine Repair Branch of Mudanjiang Hengfeng Paper Co.， Ltd.， Mudanjiang， Heilongjiang Province， 157013 157013
Hits: 2766
Download times: 1971
Abstract:In view of the breakage of the bolts on the drive side of the vacuum press roll in the paper machine， fault diagnosis was carried out. Through the actual measurement of vacuum press roll and shafts， the analysis of the force between the stone roll， vacuum press roll， and lower press in the press section of the paper machine， and the calculation of the torque provided by the motor on the drive side and the shear strength of the bolt on the drive side of the vacuum press roll， the reasons for the breakage of the vacuum press roll bolts was investigated. The results showed that reasons were as follows： ① the vacuum press roll had a clearance fit with the shaft； ② the linear pressure on the vacuum press roll was too large； ③ the actual shear strength of the bolt was greater than the allowable shear stress of its corresponding material. It was also proposed that relevant preventive measures to prevent the vacuum press roll bolt from breaking in this paper. The maintenance and transformation of the vacuum press roll should be done during the maintenance period of the paper machine to provide the necessary guarantee for the safe operation of the paper machine in the future.
View Full Text  HTML  View/Add Comment  Download reader