本文二维码信息
二维码(扫一下试试看!)
Study on the Preparation of Carbon Fiber Reinforced Plastic Based on Papermaking Process
  
DOI:10.11980/j.issn.0254-508X.2018.08.002
Key Words:carbon fiber reinforced composites  papermaking process  influencing factors
Author NameAffiliation
YAN Xin State Key Lab of Pulp and Paper Engineering, School of Light Chemistry Engineering, South China University of Technology Guangzhou Guangdong Province 510640 
WANG Xi-wen* State Key Lab of Pulp and Paper Engineering, School of Light Chemistry Engineering, South China University of Technology Guangzhou Guangdong Province 510640 
Hits: 6554
Download times: 2038
Abstract:Carbon fiber reinforced plastic(CFRP) is a light weight, high strength, high performance composite. The fabrication of CFRP with low cost can greatly boost the development of new energy vehicles and other products. In this paper, preparation of carbon fiber reinforced thermoplastic(CFRTP) based on papermaking process(wet process) was proposed. The method had the advantages of simple process, low cost and easy recovery of carbon fiber. The paper discussed the influence of modulus, length and usage of carbon fiber as well as molding process on the mechanical properties of the materials. The experimental results showed that the preparation of CFRTP by wet process was feasible. When the carbon fiber content was 30%, the tensile strength, bending strength, notched impact toughness of the materials were 110.07 MPa, 208.59 MPa and 42.89 kJ/m2, respectively. And the porosity of the material was the lowest and the mechanical properties were the best.
View Full Text  HTML  View/Add Comment  Download reader