本文二维码信息
二维码（扫一下试试看！）
Performance Comparison of Several New Stabilizers for Hydrogen Peroxide Bleaching of Chemi-mechanical Pulp
Received:January 16, 2024  
DOI：10.11980/j.issn.0254-508X.2024.07.021
Key Words:chemi-mechanical pulp  hydrogen peroxide  bleaching stabilizer  scaling phenomenon
Fund Project:国家自然科学基金项目（32171727）；中轻集团科技创新基金项目（ZQ2023JC-GC01）；中轻集团科技创新重点专项（ZQ2022JC-QN01）。
Author NameAffiliationPostcode
CHENG Ming Zhejiang Zhongxin Environmental Protection Technology Co.， Ltd.， Jinhua， Zhejiang Province， 321100 321100
TENG Bubin Zhejiang Zhongxin Environmental Protection Technology Co.， Ltd.， Jinhua， Zhejiang Province， 321100 321100
JI Wenhu Zhejiang Zhongxin Environmental Protection Technology Co.， Ltd.， Jinhua， Zhejiang Province， 321100 321100
CHENG Yun China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
ZHANG Hongjie* China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
ZHANG Xue China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
HOU Leilei China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
CHEN Linghua China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
CHEN Xuemei China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
Hits: 384
Download times: 363
Abstract:In this study， the feasibility， advantages and disadvantages of three stabilizers （LS-8838， SB-005 and KML） replacing traditional sodium silicate for hydrogen peroxide bleaching of chemical pulp were discussed. The using conditions of bleaching stabilizers were optimized. The scaling phenomena between these three types bleaching stabilizers and Na2SiO3 in hydrogen peroxide bleaching process were compared. The results showed that when the dosage of NaOH was 3%， the dosage of H2O2 was 5%， and the bleaching time was 60 min， the optimal dosage of bleaching stabilizer （LS-8838， SB-005， KML） was 0.3%， pulp concentration was 25%， and bleaching temperature was 80 ℃. The bleaching effect with dosage of Na2SiO3 of 1.5% could be achieved by adding three bleaching stabilizers with dosage of 0.3%， and the brightness was 75.4%， 76.4% and 74.4%， respectively. The amount of residual H2O2 was 62.5%， 135.4% and 87.5%， and the tensile strength of the paper made from it was increased by 14.3%， 18.6% and 0.6%， respectively. Among them， the slurry treated by SB-005 had the best brightness and strength， but its silicon content was higher and the scaling phenomenon was more serious. The bleaching effect （amount of residual H2O2， whiteness， and intensity） of LS-8838 and phosphorus-containing silica-free KML was also better than that of Na2SiO3， among which LS-8838 had the best bleaching effect and no scaling phenomenon， and could be used as a substitute for sodium silicate.
View Full Text  HTML  View/Add Comment  Download reader