本文二维码信息
二维码（扫一下试试看！）
Study on the Effect of Cellulose Nanofibers on the Surface Properties of Thermal Sublimation Transfer Paper
Received:February 01, 2024  
DOI：10.11980/j.issn.0254-508X.2024.07.020
Key Words:cellulose nanofibers  thermal transfer paper  surface properties  transfer rate
Fund Project:浙江省“尖兵领雁+X”研发攻关计划项目（2024C03120）；浙江省公益技术研究项目（LGG19C160001）。
Author NameAffiliationPostcode
LIU Hua School of Environmental and Natural Resource， Zhejiang University of Science and Technology， Hangzhou， Zhejiang Province， 310023 310023
HU Zhijun* School of Environmental and Natural Resource， Zhejiang University of Science and Technology， Hangzhou， Zhejiang Province， 310023 310023
DING Wei Zhejiang Zhefeng New Material Co.， Ltd.， Quzhou， Zhejiang Province， 324022 324022
HUANG Guanhong School of Environmental and Natural Resource， Zhejiang University of Science and Technology， Hangzhou， Zhejiang Province， 310023 310023
HUANG Xingyu School of Environmental and Natural Resource， Zhejiang University of Science and Technology， Hangzhou， Zhejiang Province， 310023 310023
XU Shuoyuan School of Environmental and Natural Resource， Zhejiang University of Science and Technology， Hangzhou， Zhejiang Province， 310023 310023
Hits: 613
Download times: 522
Abstract:The impact of cellulose nanofibers （CNF） coating on both surface and printing properties of thermal sublimation transfer base paper was investigated in this study. The results showed that with the increase of CNF addition amount in coating， the coating viscosity showed the trend of decreasing and then increasing， when the CNF addition amount was 1%， the coating viscosity was 6.30% lower than that when CNF was not added， and the addition of appropriate amount of CNF was beneficial to the uniform distribution of coating components. With the increase of CNF addition amount in coating， the smoothness， surface strength， Cobb value and transfer rate of the thermal transfer paper showed the trend of increasing and then decreasing， and the drying speed of printing ink had not much changed. When the addition amount of CNF in coating was 2%， the transfer rate of thermal transfer paper reached the highest value （85.41%）， which was higher than that of the original paper， the commercially available comparative paper samples and the non-added CNF by 28.46， 15.96 and 3.93 percent point， indicating that the composite coatings with the addition of CNF could significantly increase the transfer rate of the ink.
View Full Text  HTML  View/Add Comment  Download reader