|
![本文二维码信息](/download_upload_file.aspx?file_name=/uploadfile/two_dimensional_code_img/zgzzen/2024/3/202403018.png) 二维码(扫一下试试看!) |
Fe-derived Fenton-like Catalyst for Non-homogeneous Treatment of Papermaking Wastewater |
Received:September 19, 2023 |
DOI:10.11980/j.issn.0254-508X.2024.03.018 |
Key Words:high-temperature sintering Fenton-like catalyst papermaking wastewater non-homogeneous Fenton |
|
Hits: 826 |
Download times: 504 |
Abstract:To solve the problems of large amount of iron sludge and high cost in the traditional homogeneous Fenton method for the deep treatment of papermaking wastewater, Fe-derived Fenton catalysts were prepared by high temperature sintering of Fe2O3, Al2O3, SiO2, and graphite powder, which was used in the non-homogeneous Fenton treatment of papermaking wastewater to achieve the effect of saving the dosage of FeSO4. The results showed that the Fe-derived Fenton-like catalyst prepared by high-temperature sintering had a rich pore structure. Under the conditions that pH value of 3, catalyst dosage of 15 g/L, mass ratio of CODCr and H2O2 of 1∶0.75, and reaction time of 90 min, the removal rate of CODCr was up to 74.8% and more than 70% even after 10 cycles of experiments. The removal rate of BOD5 could be more than 67%. |
View Full Text HTML View/Add Comment Download reader |