本文二维码信息
二维码（扫一下试试看！）
Study on Preparation and Graphitization of Carbon Paper for Fuel Cell
Received:February 20, 2023  
DOI：10.11980/j.issn.0254-508X.2023.12.002
Key Words:fuel cell  carbon fiber non-woven  carbon paper  graphitization
Fund Project:国家自然科学基金（52002296，U1960106）。
Author NameAffiliationPostcode
QU Liang School of Chemistry and Chemical Engineering， Hubei Engineering Research Center of Pitch-based Advanced Carbon Materials， Wuhan University of Science and Technology， Wuhan， Hubei Province， 430081 430081
LI Yanjun* School of Chemistry and Chemical Engineering， Hubei Engineering Research Center of Pitch-based Advanced Carbon Materials， Wuhan University of Science and Technology， Wuhan， Hubei Province， 430081 430081
ZHU Hui School of Chemistry and Chemical Engineering， Hubei Engineering Research Center of Pitch-based Advanced Carbon Materials， Wuhan University of Science and Technology， Wuhan， Hubei Province， 430081 430081
LI Baoliu School of Chemistry and Chemical Engineering， Hubei Engineering Research Center of Pitch-based Advanced Carbon Materials， Wuhan University of Science and Technology， Wuhan， Hubei Province， 430081 430081
DONG Zhijun School of Chemistry and Chemical Engineering， Hubei Engineering Research Center of Pitch-based Advanced Carbon Materials， Wuhan University of Science and Technology， Wuhan， Hubei Province， 430081 430081
LI Xuanke School of Chemistry and Chemical Engineering， Hubei Engineering Research Center of Pitch-based Advanced Carbon Materials， Wuhan University of Science and Technology， Wuhan， Hubei Province， 430081 430081
Hits: 1102
Download times: 800
Abstract:With polyacrylonitrile （PAN） based carbon fiber non-woven fabric as the backbone， carbon paper for fuel cell was prepared by impregnating with phenol-formaldehyde ethanol solution， molding and carbonizing， then graphitized at different temperature. The effects of different graphitization temperature on the properties of carbon paper base paper were investigated by modern analytical instruments， including microscopic morphology， in-plane resistivity， pore distribution， tensile strength， and other indicators. The results showed that the large aggregated and disordered resin carbons were gradually shrunk to the surface of carbon fiber and the intersection point of carbon fiber with each other during the graphitization process， obtaining a more perfect graphite crystal structure. The carbon paper base paper could be obtained with good performance to meet the application requirements of the gas diffusion layer after being graphitized at least at 2000 ℃. When the graphitization temperature was 2000 ℃， the carbon paper base paper was prepared with the in-plane resistivity of 19.0 mΩ·cm， the tensile strength of 17.8 MPa， and the porosity of 79.15%.
View Full Text  HTML  View/Add Comment  Download reader