本文二维码信息
二维码（扫一下试试看！）
Study on the Preparation Process of Industrial Hemp Stalk Nanocellulose
Received:June 22, 2022  
DOI：10.11980/j.issn.0254-508X.2023.02.004
Key Words:industrial hemp stalk  cellulose  nanocellulose  TEMPO oxidation
Author NameAffiliationPostcode
ZHANG Tao Key Lab of Bio-based Materials Science and Technology of Ministry of Education，Northeast Forestry University， Harbin， Heilongjiang Province， 150040 150040
LI Mengyang Key Lab of Bio-based Materials Science and Technology of Ministry of Education，Northeast Forestry University， Harbin， Heilongjiang Province， 150040 150040
XIANG Yuzhou Key Lab of Bio-based Materials Science and Technology of Ministry of Education，Northeast Forestry University， Harbin， Heilongjiang Province， 150040 150040
MA Peilin Key Lab of Bio-based Materials Science and Technology of Ministry of Education，Northeast Forestry University， Harbin， Heilongjiang Province， 150040 150040
YUE Jinquan* Key Lab of Bio-based Materials Science and Technology of Ministry of Education，Northeast Forestry University， Harbin， Heilongjiang Province， 150040 150040
Hits: 2099
Download times: 1697
Abstract:In order to realize the high added value utilization of industrial hemp stalk， this study used industrial hemp stalk as raw material. By measuring the chemical components of the raw material， the basic characteristic of high cellulose content（41.45%）was shown， and the possibility of preparing nanocellulose was confirmed. Combined with ultrasound， the oxidized nanocellulose（TCNF）was prepared by TEMPO-NaBr-NaClO catalytic oxidation system. The morphology， chemical structure， crystallinity and thermal stability of TCNF in each stage of the preparation process were studied. The results showed that the TCNF prepared from the industrial hemp stalk had a uniform distribution of 3~6 nm in diameter， retained the typical Ⅰ-type structure of cellulose， had a crystallinity of 50.8%， and had good thermal stability.
View Full Text  HTML  View/Add Comment  Download reader