本文二维码信息
二维码（扫一下试试看！）
Study on Improving Water and Oil Resistance of Pulp Molding Packaging Materials with Acrylate Copolymers
Received:October 21, 2021  
DOI：10.11980/j.issn.0254-508X.2022.04.002
Key Words:acrylate copolymer  pulp molding packaging material  water resistance  oil resistance  Kit value
Fund Project:国家自然科学基金（项目编号：32001276；32171727）。
Author NameAffiliationPostcode
ZHANG Haiyan School of Light Industry Science and Engineering， Tianjin University of Science and Technology， Tianjin， 300457
China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
CHENG Yun China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
ZHAO Yumeng China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
ZHANG Xue China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
JIAO Ting School of Light Industry Science and Engineering， Tianjin University of Science and Technology， Tianjin， 300457
China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
ZHANG Wenhui School of Light Industry Science and Engineering， Tianjin University of Science and Technology， Tianjin， 300457 300457
ZHANG Hongjie* China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
Hits: 3758
Download times: 2372
Abstract:In this paper， the pulp molding was prepared with bamboo chemical pulp and softwood chemical pulp， and the modified fluorine-free acrylate copolymers were coated on the surface of the pulp molding packaging materials by Meyer rod coating or dip coating. The mechanical properties， water and oil resistance of the pulp molded packaging material before and after treatment were evaluated. The results showed that， compared with the molding without any additives， the mechanical properties of pulp molding packaging materials using three acrylate copolymers were slightly lower， and the water resistance and oil resistance were enhanced significantly. Among them， the Cobb value was reduced from 508 g/m2 （without additives） to 15~18 g/m2， the water contact angle remained at a high level after 5 min， and the oil resistance grade （Kit value） could reach 8 or more， but its hot water and hot oil resistance were relatively poor. The Cobb value of pulp molding packaging material was further decreased to 0.9~2.1 g/m2 by using the starch-modified fluorine-free acrylate copolymer， the change value of water contact angle within 5 min was only 4.0°~8.2°， and the oil-proof grade could reach to more than 10 and its hot water and hot oil resistance were significantly improved.
View Full Text  HTML  View/Add Comment  Download reader