|
![本文二维码信息](/download_upload_file.aspx?file_name=/uploadfile/two_dimensional_code_img/zgzzen/2021/12/202112003.png) 二维码(扫一下试试看!) |
Effect of Hydrothermal Treatment on the Poplar Microstructure and Degradation Products |
Received:July 03, 2021 |
DOI:10.11980/j.issn.0254-508X.2021.12.003 |
Key Words:poplar hydrothermal treatment micro morphology process optimization |
Fund Project:国家自然科学基金项目(31870566);山东省泰山学者工程。 |
|
Hits: 2570 |
Download times: 1671 |
Abstract:The effects of different treatment conditions on the content of total xylose, acetic acid and lignin in the poplar hydrothermal treatment liquor and the microstructure of poplar wood chips were discussed. The single factor experiment was used to explore the changing law of the total xylose content in the hydrothermal treatment liquor. The total xylose content was used as an indicator to optimize the poplar hydrothermal treatment conditions via response surface method. The results showed that with the increase of the hydrothermal treatment temperature, the area and number of microscopic pores of the wood chips increased, whereas the number of irregular exfoliation and micro-spherical deposits on the surface of the wood chips also increased. Therefore, the specific surface area of wood chips increased first and then decreased. The total xylose content in the poplar hydrothermal treatment liquor reached the optimal value of 76.54 mg/g with the reaction temperature of 172.51℃, the holding time of 88.14 min, and the solid-liquid ratio of 1 ∶ 6.06. The content of lignin and acetic acid were 34.14 mg/g and 11.28 mg/g, respectively. |
View Full Text HTML View/Add Comment Download reader |