|
二维码(扫一下试试看!) |
Study on Application of Coated Cigar Flavor Cigarette Paper |
Received:April 21, 2021 |
DOI:10.11980/j.issn.0254-508X.2021.10.005 |
Key Words:coating type cigarette paper cigar flavor mainstream cigarette smoke sensory quality |
Fund Project:河南中烟工业有限责任公司科技项目“雪茄风味卷烟纸的开发及应用”(ZW201709)。 |
|
Hits: 3168 |
Download times: 2012 |
Abstract:The effect of cigar flavor coating liquid on the physical properties of cigarette paper, and the effect of cigar flavor cigarette paper on cigarette sensory quality, burning behavior and mainstream smoke components were investigated in this study. The results showed that cigarette paper production status was good enough to wrap cigarette when solvent of the coating solution was ethanol or ethanol/propylene glycol (volume ratio of 7∶3), and the drying temperature was 70~80℃. The main physicochemical factors of coated cigar flavor cigarette paper were all within the standard range. Compared with blank cigarette paper, basic weight of cigar flavor cigarette paper increased from 27.1 g/m2 to 27.8 g/m2, smoldering rate increased from 78 s/150 mm to 86 s/150 mm at most, tensile energy absorption index decreased from 9.87 J/m2 to 6.87 J/m2, air permeability decreased from 64.8 CU to 59.4 CU at most. The dry matter of coating liquid could account for up to 15% of the paper mass. The smell fragrance of cigar flavor cigarette paper was obvious and C-2 cigarette had highest sensory evaluation score of 50.79. The contents of nicotine, tar and CO in mainstream cigarette smoke of cigar flavor cigarette were all within the control range. The ash gray of cigar flavor cigarette was better than that of blank cigarette, and the burning rate was slightly reduced. |
View Full Text HTML View/Add Comment Download reader |