本文二维码信息
二维码（扫一下试试看！）
Study on Preparation of Corn Stalk Chemi-mechanical Pulp and Its Papermaking Properties
Received:June 07, 2021  
DOI：10.11980/j.issn.0254-508X.2021.08.002
Key Words:corn stalk  chemi-mechanical pulp  Sinocalamus affinis semi-chemical pulp
Fund Project:对发展中国家科技援助项目（KY201801001）。
Author NameAffiliationPostcode
FAN Shujie China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
CHEN Changming* Gold Hongye Paper Co.， Ltd.， Suzhou， Jiangsu Province， 215126 215126
SU Zhenhua China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
NI Jianping China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
ZHANG Yu China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
YANG Bin China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
GONG Chen China National Pulp and Paper Research Institute Co.， Ltd.， Beijing， 100102
National Engineering Lab for Pulp and Paper， Beijing， 100102 		100102
Hits: 3261
Download times: 2221
Abstract:Corn stalk was pretreated with potassium hydroxide and refined to prepare chemi mechanical pulp. The physicochemical properties of the preimpregnation effluent， the physical properties of handsheets made by varying the ratio of corn stalk chemimechanical pulp and Sinocalamus affinis semi-chemical pulp， their synergistic effect and feasibility of preparing corrugated base paper at different beating revolution were discussed. The results showed that the preimpregnation effluent of corn stalk chemi-mechanical pulp could be used as organic and compound fertilizers. Compared with Sinocalamus affinis semi-chemical pulp， corn stalk chemi-mechanical pulp had higher bulk， lower tensile index， burst index， and ring crush index. Adding the Sinocalamus affinis semi-chemical pulp into the corn stalk chemi-mechanical pulp could improve the strength index of the handsheet， and reduce the handsheet bulk. When the proportion of corn stalk chemi-mechanical pulp in the mixed pulp was less than 50%， the synergistic effect affects the bonding strength between fibers， and the tested tensile index of the mixed pulp was slightly higher than the calculated value. When the proportion of Sinocalamus affinis semi-chemical pulp was 20% in the mixed pulp with the freeness of corn stalk chemi-mechanical pulp was less than 380 mL， the technical index of this as-prepared handsheet could reach the required standard of the qualified corrugated medium.
View Full Text  HTML  View/Add Comment  Download reader