本文二维码信息
二维码（扫一下试试看！）
Beating Performance of Reconstituted Tobacco Leaf Slurry Defibrated by the Refiner with a New Type of Plate
  
DOI：10.11980/j.issn.0254-508X.2019.01.007
Key Words:beating degree  wet weight  reconstituted tobacco leaf  PFI beating  fiber sieve
Author NameAffiliation
ZHANG Xiaming1 1. State Key Lab of Pulp and Paper Engineering， South China University of Technology，Guangzhou， Guangdong Province，510640 
LI Youming1 1. State Key Lab of Pulp and Paper Engineering， South China University of Technology，Guangzhou， Guangdong Province，510640 
SONG Chengjian2,* 2. Shanghai Tobacco Group Taicang Haiyan Tobacco Flakes Co.， Ltd.， Shanghai， 215400 
LEI Long2 2. Shanghai Tobacco Group Taicang Haiyan Tobacco Flakes Co.， Ltd.， Shanghai， 215400 
ZHU Xiaolin1 1. State Key Lab of Pulp and Paper Engineering， South China University of Technology，Guangzhou， Guangdong Province，510640 
Hits: 7016
Download times: 2091
Abstract:Aiming at the particularity of reconstituted tobacco leaf slurry， the beating performance of reconstituted tobacco leaf slurry defibrated by the refiner with a new type of plate was studied. Studies showed that the tobacco leaf slurry was easy to be beaten after defibrating. When beating with a PFI mill and beating concentration was 8.0%, beating time was 1200 r， the beating degree could reach 70°SR and the wet weight was 1.3 g. The proportion distribution of the mass fraction of the fiber was approximately normal distribution， it greatly improved the formation of the tobacco sheets. The increase of beating time had a low effect on the length and width of the fibers， and the fiber coarseness of the slurry decreased significantly. As the beating degree increasing， the breaking length of the tobacco sheet rapidly increased to a certain value then declined, the bulk and the air permeability continuously decreased．
View Full Text  HTML  View/Add Comment  Download reader