本文二维码信息
二维码（扫一下试试看！）
A Test Platform Based on LabVIEW Software for Disc Refiner Vibration
  
DOI：10.11980/j.issn.0254-508X.2018.12.008
Key Words:vibration test  disc refiner  labVIEW software  balance test
Fund Project:陕西省重点科技创新团队计划项目（项目编号：2014KCT-15）；陕西省科技统筹创新工程计划项目（2016KTCQ01-35）。
Author NameAffiliation
TANG Wei1 1. College of Electrical and Information Engineering，Shaanxi University of Science&Technology， Xi’an， Shaanxi Province， 710021 
SHUI Yu-yang2，* 2.College of Mechanical and Electrical Engineering， Shaanxi University of Science & Technology， Xi’an， Shaanxi Province， 710021 
WANG Gu-yue2 2.College of Mechanical and Electrical Engineering， Shaanxi University of Science & Technology， Xi’an， Shaanxi Province， 710021 
WANG Ling-li1 1. College of Electrical and Information Engineering，Shaanxi University of Science&Technology， Xi’an， Shaanxi Province， 710021 
TAO Qian1 1. College of Electrical and Information Engineering，Shaanxi University of Science&Technology， Xi’an， Shaanxi Province， 710021 
Hits: 6947
Download times: 1892
Abstract:In order to meet the needs of dynamic balance testing and fault monitoring during operation of the rotating machinery， a vibration test platform for disc refiner was designed. The test platform used the operation station and the MCC data acquisition card as the hardware basis， completed the secondary development of the test system software on the LabVIEW software development platform.Combining the powerful calculation capacity of operation station and the testing function of the hardware， the function of acquisition， processing and analysis of vibration signals was therefore achieved.The three-point weighting method was adopted to carry out dynamic balance test of the disc refiner.The measured data was consistent with that in theory， which verified the feasibility and practicability of the vibration test platform design．
View Full Text  HTML  View/Add Comment  Download reader