|
二维码（扫一下试试看！） |
| Treatment of Sulfite Pulping Effluent by Sodium Ferrate-polymer Aluminum Ferric Sulfate Chloride |
| |
| DOI：10.11980/j.issn.0254-508X.2013.06.004 |
| Key Words:sodium ferrate polymer aluminum ferric sulfate chloride sulfite pulping wastewater wastewater treatment |
| Fund Project:河南省重大科技攻关计划项目（NO.082201343102） |
| Author Name | Affiliation | | 王 俊1,2 | 1.河南省科学院化学研究所有限公司,河南郑州,450002；2.河南省木质素工程技术研究中心,河南郑州,450002 | | 崔俊峰1,2 | 1.河南省科学院化学研究所有限公司,河南郑州,450002；2.河南省木质素工程技术研究中心,河南郑州,450002 | | 唐 启2,3 | 2.河南省木质素工程技术研究中心,河南郑州,450002；3.河南省有色金属地质矿产局第四地质大队,河南郑州,450000 | | 张富强1,2 | 1.河南省科学院化学研究所有限公司,河南郑州,450002；2.河南省木质素工程技术研究中心,河南郑州,450002 | | 罗亚敏4 | 4.舞钢市环境保护局,河南舞钢,462500 |
|
| Hits: 9205 |
| Download times: 2474 |
| Abstract:Sodium ferrate and polymer aluminum ferric sulfate chloride (PAFCS) were synthesized with industrial waste as the main raw material, and used for treatment of effluent from bleaching and washing stages of a sulfite pulping line, the effect of sodium ferrate and PAFCS dosages on the removal of the COD, chroma and pH value of the effluent was investigated. The experimental results indicated that when sodium ferrate dosage was 1.0 g/L, PAFCS dosage was 1.0 g/L, COD and chroma removal rates were 82.41% and 93.75%, CODCr was 48.2 mg/L, chroma was 5 times and pH value was 7.46. |
| View Full Text HTML View/Add Comment Download reader |
|
|
|