|
二维码(扫一下试试看!) |
基于纤维素膜/PEDOT:PSS的电致变色器件及其性能研究 |
Electrochromic Devices Based on Cellulose Film/PEDOT:PSS and Its Properties |
收稿日期:2022-07-28 |
DOI:10.11980/j.issn.0254-508X.2023.04.006 |
关键词: 电致变色器件 纤维素膜 PEDOT:PSS 透明导电基底 |
Key Words:electrochromic device cellulose film PEDOT: PSS transparent conductive substrate |
基金项目:国家自然科学基金(31971612;31700520)。 |
|
摘要点击次数: 2366 |
全文下载次数: 1410 |
摘要:基于纤维素开发了一种环保的高性能电致变色器件(ECD)。通过在纤维素膜表面旋涂聚(3,4-亚乙二氧基噻吩)-聚(苯乙烯磺酸)(PEDOT:PSS),获得纤维素膜/PEDOT:PSS透明导电基底,并与电解质复合构建ECD。随着纤维素膜表面PEDOT:PSS旋涂层数的增加,纤维素膜/PEDOT:PSS透明导电基底的导电率呈增加趋势,透光率呈降低趋势,旋涂3层PEDOT:PSS的纤维素膜/PEDOT:PSS透明导电基底具有77%的透光率和465 Ω/sq的电阻。通过施加3 V的正向电压,制备的ECD的透光率可在10 s内从77%下降至53%,且施加3 V的负向偏压,其透光率可以快速恢复。此外,制备的ECD电致变色能力在循环100次后仍然保持较为稳定的状态。 |
Abstract:In this study, an environmentally friendly electrochromic device (ECD)was developed based on cellulose.Poly(3,4-ethylenedioxyethiophene)-poly(styrene sulfonic acid) (PEDOT: PSS) was spin-coated on the cellulose film surface to obtain the cellulose film/PEDOT:PSS transparent conductive substrate, which was used to compound with electrolytes to build ECD. As the number of PEDOT:PSS spin coats on the cellulose film surface increased, the conductivity of the cellulose film/PEDOT:PSS transparent conductive substrate showed an increasing trend and the light transmission showed a decreasing trend. The cellulose film/PEDOT:PSS transparent conductive substrate spin-coated with 3-layer had light transmission of 77% and resistance of 465 Ω/sq. By applying a positive voltage of 3 V, the transmittance of prepared ECD decreased from 77% to 53% within 10 s, and the transmittance was quickly recovered by applying a negative voltage. In addition, the electrochromic ability of prepared ECD remained relatively stable after 100 cycles. |
查看全文 HTML 查看/发表评论 下载PDF阅读器 |