|
二维码（扫一下试试看！） |
| 基于ANSYS的新型锥形磨浆机的结构分析与仿真 |
| Structural Analysis and Simulation of a New Conical Refiner Based on ANSYS |
| 收稿日期：2019-09-12 |
| DOI：10.11980/j.issn.0254-508X.2020.01.007 |
| 关键词: 锥形磨浆机 ANSYS 静力学分析 动力学模态分析 |
| Key Words:conical refiner ANSYS static analysis dynamic modal analysis |
| 基金项目: |
|
| 摘要点击次数: 4838 |
| 全文下载次数: 3385 |
| 摘要:为了检验新型锥形磨浆机结构设计的可行性，对新型锥形磨浆机的主要受力部件，包括主轴、机座、磨室等，采用有限元分析的方法进行了基于ANSYS的静力学分析和动力学模态分析，探讨了锥形磨浆机的主要受力部件的应力应变和共振情况。结果表明，新型锥形磨浆机的主要受力部件均满足强度和刚度的要求，且能够避免发生共振现象。 |
| Abstract:In order to verify the feasibility of structural design of a new conical refiner，the static and dynamic modal analyses based on ANSYS were carried out for the main stress components of the new conical refiner，including spindle, frame and grinding chamber by using the finite element analysis method. The stress，strain and resonance of the main stressed parts of the conical refiner were discussed. The results showed that the main stress components of the new conical pulp refiner met the requirements of strength and stiffness while avoiding resonance. |
| 查看全文 HTML 查看/发表评论 下载PDF阅读器 |