本文二维码信息
二维码（扫一下试试看！）
高速纸机辊筒动力学特性的有限元分析
Finite Element Analysis of Dynamic Characteristics of the Roll in High-speed Paper Machine
收稿日期：  
DOI：10.11980/j.issn.0254-508X.2015.08.011
关键词:  高速纸机  辊筒  导辊  动力学  特性  有限元分析
Key Words:high speed paper machine  roller  guide roller  dynamics  character  finit element analysis
基金项目:
作者单位
高致富1 1.神华神东电力有限责任公司, 陕西神木， 719300 
张　锋2 2.陕西科技大学轻工与能源学院, 陕西西安，710021 
焦　伟2 2.陕西科技大学轻工与能源学院, 陕西西安，710021 
摘要点击次数: 6040
全文下载次数: 1735
摘要:随着纸机车速的不断提高,辊筒动力学特性表现的愈加重要,现已成为纸机进一步提速的瓶颈。通过ANSYS Workbench有限元仿真软件对纸机辊筒进行动力学特性仿真分析研究,分析所得辊筒的固有频率、临界转速、振型以及振幅的情况,实验表明纸机辊筒属于刚性转子。同时采用有限元模态仿真技术,为进一步研究纸机辊筒的动力学特性提供了技术基础。
Abstract:With the continuous increasing of the paper machine speed, roll dynamic performance is very important and is the bottle reck of further increase of paper mechine speed. This paper used the finite element software ANSYS Workbench to conduct dynamic characteristics analysis of the rolls. The analysis of the inherent frequency, critical speed, vibration mode and amplitude of the roll, indicated that the rolls in paper machine belonged to rigis rolls. At the same time, this paper used the finite element modal simulation technology which procided the technical basis to further research dynamic characteristics of paper machine rolls.
查看全文  HTML  查看/发表评论  下载PDF阅读器