|
二维码(扫一下试试看!) |
纳米CaCO3用于颜料化表面施胶的研究 |
Application of Nano-CaCO3 in Surface Sizing |
收稿日期: |
DOI:10.11980/j.issn.0254-508X.2015.02.001 |
关键词: 纳米CaCO3,颜料化表面施胶,纸张性能 |
Key Words:nano-CaCO3 pigment-added surface sizing properties of paper |
基金项目: |
作者 | 单位 | 谢清萍1,2 | 1.中国制浆造纸研究院,北京,100102; 2.制浆造纸国家工程实验室,北京,100102 | 彭建军1,2,* | 1.中国制浆造纸研究院,北京,100102; 2.制浆造纸国家工程实验室,北京,100102 | 张权1,2 | 1.中国制浆造纸研究院,北京,100102;2.制浆造纸国家工程实验室,北京,100102 | 沈臻煌1,2 | 1.中国制浆造纸研究院,北京,100102; 2.制浆造纸国家工程实验室,北京,100102 |
|
摘要点击次数: 7477 |
全文下载次数: 1970 |
摘要:通过与淀粉、淀粉+GCC两种施胶液进行对比,探讨了纳米CaCO3在纸张表面施胶中的应用效果。结果表明,分散好的纳米CaCO3通过表面施胶在纸张表面形成的膜连续性好,纸张表面很平整。与未经表面施胶的原纸相比,使用含纳米CaCO3的施胶液表面施胶后纸张的施胶度略有提高,平滑度上升的幅度达到56.1%,抗张强度提高了12.0%,表面强度和油墨吸收性都得到了显著的改善,白度和不透明度有所下降。 |
Abstract:The Results of the application of nano-CaCO3/starch, GCC/starch and starch only in surface sizing of paper were compared. Under the sizing amount of 1.5 g/m2, the nano-CaCO3 /starch film formed on paper surface was very smooth. The sizing degree was improved slightly, the smoothness increased up to 56.1%, tensile strength increased by 12.0%, surface strength and ink absorbency were improved significantly, while brightness and opacity were declined slightly. |
查看全文 HTML 查看/发表评论 下载PDF阅读器 |
|
|
|