盘磨机种类及打浆酶预处理对打浆能耗的影响

乔　军<sup>1</sup>; 吴朝军<sup>1; 2</sup>

二维码（扫一下试试看！）

盘磨机种类及打浆酶预处理对打浆能耗的影响

Effect of Enzyme Pre-treatment and the Type of Refiner on Refining Energy Consumption

收稿日期：

DOI：10.11980/j.issn.0254-508X.2014.11.015

关键词: 打浆酶盘磨机打浆能耗

Key Words:Beating enzyme refining energy refiner

基金项目:

作者	单位
乔　军¹	1.山东太阳纸业股份有限公司,山东兖州,272100
吴朝军^1,2	1.山东太阳纸业股份有限公司,山东兖州,272100；2.齐鲁工业大学,山东济南,250353

摘要点击次数: 6096

全文下载次数: 1803

摘要:主要分析了盘磨机种类及打浆酶预处理对漂白针叶木浆(NBKP)和漂白阔叶木浆(LBKP)打浆能耗的影响。结果表明,对于NBKP和LBKP浆,在达到相同的打浆效果时，使用柱形磨打浆均比使用双盘磨打浆的单位打浆总能耗低；打浆酶和柱形磨相结合处理NBKP浆后,其单位打浆总能耗比只使用柱形磨的大幅降低。

Abstract:Application of enzymes in the pulp and paper industry has grown rapidly since the mid-1980s. Refining or beating of chemical pulp is one of the most important operations when preparing papermaking fibers for papers or paperboards production. Effect of enzyme pre-treatment before refining and the type of refiner on refining energy consumption of bleached softwood kraft pulp (NBKP) and bleached hardwood kraft pulp (LBKP) was analyzed in this work. Results revealed that the specific refining energy consumption of LBKP and NBKP with using cylindrical refiner was lower than that of using disc-type refiners. There was great difference of refining energy consumption with or without enzyme pre-treatment when cylindrical refiner was used to treat commercial NBKP.

查看全文 HTML 查看/发表评论下载PDF阅读器