Fenton流化床氧化技术在制浆造纸废水深度处理中的应用

马厚悦<sup>1</sup>; 刘燕韶<sup>1</sup>; 许修祯<sup>2</sup>

二维码（扫一下试试看！）

Fenton流化床氧化技术在制浆造纸废水深度处理中的应用

Application of Fenton Fluidized-bed Oxidation Techniques in the Advanced Treatment of Pulping and Papermaking Effluent

收稿日期：

DOI：10.11980/j.issn.0254-508X.2014.08.007

关键词: Fenton 流化床氧化废水制浆造纸

Key Words:Fenton fluidized-bed oxidation wastewater pulp and papermaking

基金项目:

作者	单位
马厚悦¹
刘燕韶¹
许修祯²

摘要点击次数: 5469

全文下载次数: 1554

摘要:本文介绍了Fenton流化床氧化技术的工艺原理。通过与传统Fenton氧化工艺的对比，分析了Fenton流化床氧化技术在提高污染物去除率、降低化学品消耗、减少污泥产生量方面的优势。Fenton流化床氧化技术应用于制浆造纸生物处理后废水的深度处理效果很好，对废水COD_Cr去除率可达到90％以上，对色度的去除率可达到99％以上。

Abstract:This paper described the technological principle of Fenton fluidized-bed oxidation techniques. The advantages of Fenton fluidized-bed techniques including higher pollutant removal rate, lower chemicals consumption and sludge production comparing with the traditional Fenton oxidation process were discussed. The COD_Cr removal rate could reach more than 90% and the color removal rate more than 99% of the pulping and papermaking effluent firstly treated with biological process then followed by Fenton fluidized-bed oxidation advanced treatment.

查看全文 HTML 查看/发表评论下载PDF阅读器