|
二维码（扫一下试试看！） |
| 黏胶纤维在高透气度滤棒成型纸上的应用研究 |
| Application of Viscose Fibre in High Porous Filter Plug Wrapping Paper |
| 收稿日期： |
| DOI：10.11980/j.issn.0254-508X.2013.06.016 |
| 关键词: 黏胶纤维 针叶木浆 透气度 抗张指数 |
| Key Words:viscose fiber softwood pulp porosity tensile strength |
| 基金项目: |
|
| 摘要点击次数: 5524 |
| 全文下载次数: 1584 |
| 摘要:研究了黏胶纤维替代部分针叶木浆生产高透气度滤棒成型纸的可行性，分析了黏胶纤维对滤棒成型纸透气度及抗张强度的影响。结果表明，在实验室条件下，针叶木浆打浆度22°SR，黏胶纤维用量40%，增强剂用量1%，滤棒成型纸手抄片可获得较高的透气度和抗张强度，透气度达到3000 CU，抗张指数达到50 N·m/g。 |
| Abstract:The influences of viscose fiber on porosity and tensile strength of the filter plug wrapping paper was studied by mixing viscose fibers withsoftwood pulp fibers as raw material. The results indicated that adding viscose fibers can enhance porosity to 3000 CU and the tensile strength to 50 N·m/g when the conditions are as follows: the amount of viscose fiber is 40%, beating degree of softwood pulp is 22°SR, and the dosage of the strengthening agent is 1%. |
| 查看全文 HTML 查看/发表评论 下载PDF阅读器 |