|
二维码（扫一下试试看！） |
| 热压工艺对间位芳纶复合纸微结构与性能的影响 |
| Effect of Hot Pressing on Micro-structure and Properties of Meta-aramid Sheets |
| 收稿日期： |
| DOI：10.11980/j.issn.0254-508X.2013.06.008 |
| 关键词: 芳纶短切纤维 沉析纤维 图像分析 力学性能 扫描电镜（SEM） |
| Key Words:aramid short fiber pulp image analysis mechanical properties scanning electron microscopy (SEM) |
| 基金项目:西安市科技局技术转移促进工程项目（CX1256（8））；陕西省造纸技术及特种纸品开发重点实验室访问学者项目（12JS024） |
|
| 摘要点击次数: 5736 |
| 全文下载次数: 1655 |
| 摘要:热压工艺是提高湿法成形芳纶纸基材料性能的重要环节。本实验采用SEM观察了间位芳纶复合纸表面及横截面在热压过程中的微观结构变化规律，并借助图像分析技术，分析了间位芳纶复合纸纸张孔隙结构的变化，结合间位芳纶复合纸力学性能，优化了间位芳纶复合纸的热压工艺，当热压温度为130℃时，间位芳纶复合纸的紧度、抗张强度、伸长率分别约为未经热压处理时的4、5和7倍。 |
| Abstract:Aramid sheets can be manufactured from aramid short fibers and pulp by wet forming process. Properties of aramid sheets can be improved by hot pressing process. The change of micro-structures of the surfaces and cross-sections of aramid sheets during hot pressing were observed by using scanning electron microscopy (SEM). The porosities of the sheet were analyzed via Image J tool and the hot pressing process was optimized. |
| 查看全文 HTML 查看/发表评论 下载PDF阅读器 |