|
二维码（扫一下试试看！） |
| 水性环氧树脂表面施胶剂基本性能的研究 |
| Baisc Property of Waterbone Epoxy Resin Surface Sizing Agent |
| 收稿日期： |
| DOI：10.11980/j.issn.0254-508X.2012.02.006 |
| 关键词: 水性环氧树脂 固化工艺 涂膜性能 |
| Key Words:waterbone epoxy resin curing proess film performance |
| 基金项目:本课题得到国家自然科学基金项目(30871995)和江苏省高校自然科学研究重大项目(09KJA220002)资助。 |
|
| 摘要点击次数: 5242 |
| 全文下载次数: 1669 |
| 摘要:采用Kissinger方程并结合不同升温速率下的水性环氧树脂固化DSC曲线,研究了水性环氧树脂的固化行为,并测试环氧树脂固化物的基本性能,从而筛选出适合造纸表面施胶用水性环氧树脂的固化工艺条件。 |
| Abstract:Curing behavior of waterbone epoxy resin was described by means of kinetic analysis according to Kissinger equation based on the results of DSC curves at different heating rates. Baisc property of curried epoxy resin was studied and the optimum curing conditions suitable for surface sizing were obtained. |
| 查看全文 HTML 查看/发表评论 下载PDF阅读器 |