本文二维码信息
二维码（扫一下试试看！）
Modification of Precipitated Calcium Carbonate Filler Particles via In-situ Surface Encapsulation with Barium Sulfate
  
DOI：10.11980/j.issn.0254-508X.2016.09.004
Key Words:precipitated calcium carbonate  calcium carbonate modification  barium sulfate modification  papermaking filler  in-situ surface encapsulation
Fund Project:四川省教育厅科研项目(15ZB0217)；四川省大学生创新创业训练计划项目(201410622028)；四川理工学院科研项目(2011RC23)。
Author NameAffiliation
高洪霞1,2 1.四川理工学院生物工程学院,四川自贡，643000；2.四川理工学院造纸科学与技术研究所,四川自贡，643000 
徐　洋1 1.四川理工学院生物工程学院,四川自贡，643000 
付茂刚1 1.四川理工学院生物工程学院,四川自贡，643000 
潘　娆1 1.四川理工学院生物工程学院,四川自贡，643000 
Hits: 6150
Download times: 1583
Abstract:Precipitated calcium carbonate (PCC) was modified via in-situ surface encapsulation with barium sulfate produced by the reaction of sodium sulfate and barium chlorite at 25℃and 90℃. The dissolution behavior, retention and drainage property of PCC and barium sulfate-coated PCC, as well as the strength and optical properties of the filled handsheets were investigated. The experimental results showed that the surface of PCC was coated by barium sulfate. After the barium sulfate-coating modification, the dissolution of the filler in distilled water decreased. The beating degree of the stock filled with the modified PCC was higher them flled with PCC. The retention rate of modified PCC was the highest when it was modified at 90℃ and the charge of barium sulfate was 50%(on PCC).The tensile index of the handsheets filled with the modified PCC increased by 6.63%, the brightness, opacity and the light scattering coefficient of the handsheets were also improved.
View Full Text  HTML  View/Add Comment  Download reader