|
二维码(扫一下试试看!) |
Using Different Additives to Improve the Inter-fiber Bonding Strength of HYP |
|
DOI:10.11980/j.issn.0254-508X.2016.02.001 |
Key Words:high yield pulp (HYP) amphoteric polyacrylamide (AmPAM) cationic microfibrillated cellulose (CMFC) cationic starch (CS) bonding strength |
Fund Project:国家自然科学基金项目(31370577)。 |
Author Name | Affiliation | 李海龙1 | 1.天津科技大学天津市制浆造纸重点实验室,天津,300457 | 张红杰1,* | 1.天津科技大学天津市制浆造纸重点实验室,天津,300457 | 李杰辉1,2 | 1.天津科技大学天津市制浆造纸重点实验室,天津,300457;2.中国制浆造纸研究院,北京,100102 | 胡惠仁1 | 1.天津科技大学天津市制浆造纸重点实验室,天津,300457 |
|
Hits: 5860 |
Download times: 2033 |
Abstract:Different kinds of chemicals, including amphoteric polyacrylamide (AmPAM), cationic starch (CS), and cationic microfibrillated cellulose (CMFC), were used in this paper to improve the inter-fiber bonding capacity and physical strength properties of poplar P-RC APMP with few sacrifice of its high bulk. The results showed that the traditional chemicals (positive AmPAM and CS) had the best strength improvement for HYP handsheets, but the bulk decreased dramatically. The new kinds of chemicals, which included CMFC, neutral AmPAM, and LHCS cationic starch with low relative molecular weight and high sufortution degree, had the positive effect on the strength properties and bulk. Furthermore, the addition modes of chemicals were modified to enhance the bonding properties of HYP-containing pulps, that was the chemicals were first added into the HYP, then the HYP was mixed with chemical pulp. The results showed that there were similar trends of strength improvement for two kinds of conditions (the HYP-containing pulps and HYP only). The CMFC, LHCS and PAE could improve the tensile strength properties of HYP-containing papers in different degrees with maintaining less decrement of bulk. |
View Full Text HTML View/Add Comment Download reader |
|
|
|