|
二维码（扫一下试试看！） |
| Effect of Partially Substituting MgO for NaOH on the Properties of DCS and Pulp in the Peroxide Bleaching of Poplar CTMP |
| |
| DOI：10.11980/j.issn.0254-508X.2015.07.002 |
| Key Words:magnesium oxide alkaline peroxide bleaching bleaching consistency DCS pulp properties |
| Fund Project:本课题得到天津市高等学校科技发展基金计划项目(20120512)的资助。 |
| Author Name | Affiliation | | 徐宁攀 | 天津科技大学天津市制浆造纸重点实验室,天津, 300457 | | 刘 苇* | 天津科技大学天津市制浆造纸重点实验室,天津, 300457 | | 侯庆喜 | 天津科技大学天津市制浆造纸重点实验室,天津, 300457 | | 阎 妍 | 天津科技大学天津市制浆造纸重点实验室,天津, 300457 | | 刘仁俊 | 天津科技大学天津市制浆造纸重点实验室,天津, 300457 |
|
| Hits: 5719 |
| Download times: 1478 |
| Abstract:Alkaline peroxide bleaching of poplar chemi-thermomechanical pulp (CTMP) was conducted by partially magnesium oxide (MgO) for substituting sodium hydroxide (NaOH). The properties of the dissolved and colloidal substances (DCS) and the pulp under different bleaching consistencies and substitution percentages of MgO were analyzed. The results showed that the pH, conductivity, solid content and cationic demand (CD) of the DCS water samples decreased obviously with the increase of substitution percentages of MgO, while the turbidity increased firstly and then decreased. The conductivity, solid content and CD of the DCS water samples increased with the increase of bleaching consistency within the range of 10%～30%. The pulp strength and brightness were higher at higher bleaching consistency, but the bulk, opacity and light-scattering coefficient of the resultant pulp decreased. Meanwhile, at two different conditions (30% bleaching consistency with 25% substitution percentage of MgO, and 10% bleaching consistency without using MgO), the strength properties of the resultant pulps were much similar, while the bulk and opacity increased significantly. |
| View Full Text HTML View/Add Comment Download reader |
|
|
|