|
二维码（扫一下试试看！） |
| Usage of Starch Coated Aluminum Hydroxide in Making Flame Retardant Fiber Molding Wall Decoration Materials |
| |
| DOI：10.11980/j.issn.0254-508X.2013.02.002 |
| Key Words:wall decoration materials flame retardant aluminum hydroxide starch |
| Fund Project:国家重点基础研究发展规划“973”计划(2010CB732205)；华南理工大学亚热带建筑科学国家重点实验室开放基金资助项目（2010KB21）；制浆造纸工程国家重点实验室开放基金项目（200914）；广东省产学研重大重点项目：基于建筑节能与设计技术要求的环保复合轻质墙材系列的研发（2010A090200073);梅州高新区现代产业公共服务平台建设（B2120603）；华南理工大学特种绝缘纸校企合作创新实验室建设(Y1110090)。 |
|
| Hits: 4423 |
| Download times: 1387 |
| Abstract:This paper aimed at making flame retardant wall decoration materials through the pretreatment of aluminum hydroxide by cationic starch. The results indicated that the particle size of aluminum hydroxide increased after pretreating with cationic starch. The ash content of wall decoration materials increased obviously with the dosage of cationic starch increased. The ash content in the materials obtained through the pretreatment process increased much more visible. When the starch was used in pretreatment or added into the pulp and the dosage of cationic starch was 1.5%, the ash contents in the wall decoration materials were reach the maximum, 19.9% and 19.3% respectively. In addition, this paper analyzed the effect of pretreatment process on the physical strength of fiber molding wall decoration materials in terms of stiffness, and drainability, finally the flame retardant mechanism was studied by using TGA and SEM. |
| View Full Text HTML View/Add Comment Download reader |