Determine method for adhesion quality on cigarette tipping paper by spectral confocal
投稿时间：2024-06-05  修订日期：2024-07-05
DOI：
Key Words:cigarette tipping paper  adhesives  thickness  distribution
Fund Project:国家烟草专卖局重大科技项目“烟草行业质量监控大数据构建及应用研究”(110202101080(SJ-04))。
作者单位邮编
姚双挺 浙江中烟工业有限责任公司 315504
蒋志才 浙江中烟工业有限责任公司 
李晓辉 国家烟草质量监督检验中心 
柴武君 浙江中烟工业有限责任公司 
徐羽鹏 国家烟草质量监督检验中心 
刘博 浙江中烟工业有限责任公司 
林建南 浙江中烟工业有限责任公司 
许恒誉 浙江中烟工业有限责任公司 
周明珠 国家烟草质量监督检验中心 
董浩* 国家烟草质量监督检验中心 450001
摘要点击次数: 78
全文下载次数: 0
Abstract:To achieve accurate detection of the adhesion quality on cigarette tipping paper, a spectral confocal detection system has been established. This system enables the measurement of the thickness and distribution uniformity of adhesives on the surface of the tipping paper. By comparing the results with those obtained from scanning electron microscopy, the accuracy of the spectral confocal detection method has been further verified. The results indicate that the spectral confocal system is capable of precisely capturing subtle differences in the thickness of adhesives in the gluing areas of the same sample. Different types of tipping paper exert a significant influence on the thickness of adhesives, with the measured thickness ranging from 8.7 μm to 15.1 μm across three types of samples.
  HTML  查看/发表评论  下载PDF阅读器