本文二维码信息
二维码(扫一下试试看!)
烟梗、碎片及木浆比例对造纸法烟草薄片物理性能的影响
Effect of the Proportion of Tobacco Stem, Tobacco Scrap and Fibre on Physical Properities of Paper-process Reconstituted Tobacco
收稿日期:  
DOI:10.11980/j.issn.0254-508X.2014.03.008
关键词:  造纸法烟草薄片  抗张指数  耐破指数  响应面法
Key Words:paper-process reconstituted tobacco  tensile index  bursting index  response surface methodology
基金项目:云南省科技计划项目“国内外造纸法烟草薄片产品与技术比较(2010CD145)”;国家烟草专卖局重大专项项目“降低烟草CO的关键技术开发及应用研究”(110201201036(ZZ-17))。
作者单位
殷艳飞1 1.云南烟草科学研究院云南昆明650106 
马 迅1 1.云南烟草科学研究院云南昆明650106 
王保兴1 1.云南烟草科学研究院云南昆明650106 
刘 晶1 1.云南烟草科学研究院云南昆明650106 
向海英1 1.云南烟草科学研究院云南昆明650106 
王 建1 1.云南烟草科学研究院云南昆明650106 
熊 伟2 2.昆明理工大学云南昆明650500 
林樱楠3 3.中国农业科学院烟草研究所山东青岛266101 
王浩雅1,* 1.云南烟草科学研究院云南昆明650106 
摘要点击次数: 2310
全文下载次数: 587
摘要:采用响应面实验设计方法,研究了不同烟梗、碎片及木浆比例对造纸法烟草薄片抗张指数和耐破指数的影响。结果表明,烟梗、碎片及木浆比例与造纸法烟草薄片抗张指数和耐破指数间存在较强的相关性,且回归模型的显著性好,可用于分析预测符合造纸法烟草薄片抗张指数和耐破指数要求的原料配方;验证实验结果相对偏差在7%以内,说明该模型具有较高可信度。
Abstract:The influence of the proportion of tobacco stem, tobacco scrap and fibre on physical properties of the paper-process reconstituted tobacco (PRT) such as tensile index and bursting index was investigated by using response surface experiment design method (RSM). The results indicated that there was significant correlation between the proportion of the materials and physical properties, which could be used to predicted the tensile index and bursting index of PRT. Confirmatory trials showed that the relative deviation was less than 7%, which suggested that there was good fit degree between the experimental results and the values predicted by the equation.
查看全文  查看/发表评论  下载PDF阅读器