本文二维码信息
二维码(扫一下试试看!)
P-RC APMP制浆废水沸腾传热系数的研究
Study on Boiling Heat Transfer Coefficient of P-RC APMP Waste Water
收稿日期:  
DOI:10.11980/j.issn.0254-508X.2011.03.006
关键词:  P-RC APMP制浆废水  沸腾传热系数  热通量  流速
Key Words:P-RC APMP waste water  boiling heat transfer coefficient  heat flux  flow velocity
基金项目:国家“十一五”科技支撑计划项目(2006BAD32B07)。
作者单位
霍晓东 天津科技大学天津市制浆造纸重点实验室天津300457 
刘秋娟 天津科技大学天津市制浆造纸重点实验室天津300457 
贾原媛 天津科技大学天津市制浆造纸重点实验室天津300457 
摘要点击次数: 4828
全文下载次数: 1496
摘要:研究了P-RC APMP制浆废水的沸腾传热系数,实验在强制循环蒸发器上进行,考察了热通量、流体流速、流体浓度对P-RC APMP制浆废水沸腾传热系数的影响。结果表明,在一定的热通量下,随着流体流速的增加,P-RC APMP制浆废水沸腾传热系数增加;浓度不同,流速对传热系数的影响不同,浓度越大,流速对传热系数的影响越大。
Abstract:The boiling heat transfer coefficient of P-RC APMP waste water was studied in this paper.The experiment was carried out using the forced circulation evaporator. The influence of heat flux, velocity of flow and the solid content of the waste water on boiling heat transfer coefficient was investigated. The results showed that under a certain heat flux, the boiling heat transfer coefficient of P-RC APMP waste water increases as the velocity of flow increases. The influence of flow velocity on the boiling heat transfer coefficient varies with the solid content of P-RC APMP waste water, it becomes greater as the solid content increases.
查看全文  HTML  查看/发表评论  下载PDF阅读器