本文二维码信息
二维码(扫一下试试看!)
淀粉-硬脂酸复合物改性PCC的制备及其应用
Preparation of Starch-stearic Complex Modified PCC Filler and Its Application as Paper Filler
收稿日期:  
DOI:10.11980/j.issn.0254-508X.2011.01.002
关键词:  碳酸钙  淀粉-硬脂酸  交联剂  表面改性  纸张性能
Key Words:PCC  starch-stearic acid  cross linking agent  surface modification  paper property
基金项目:
作者单位
白雯锐 华南理工大学制浆造纸工程国家重点实验室广东广州510640 
樊慧明 华南理工大学制浆造纸工程国家重点实验室广东广州510640 
摘要点击次数: 5818
全文下载次数: 1507
摘要:针对造纸常用填料沉淀碳酸钙(PCC)加填量较大时纸张强度严重下降的问题,利用淀粉-硬脂酸复合物同时添加交联剂六偏磷酸钠的方法对PCC进行表面改性,研究改性PCC制备工艺及改性PCC和未改性PCC对纸张物理性能的影响。结果表明,当淀粉用量为PCC质量的25%,淀粉质量分数为3.0%,硬脂酸用量为PCC质量的4.0%,交联剂用量为PCC质量的1.0%时,制得的改性PCC性能较好。相同灰分含量下,与加填未改性PCC纸张相比,加填改性PCC纸张的抗张指数、耐破指数、撕裂指数和白度性能更佳。
Abstract:The paper strength is seriously decreased when the loading of traditional filler such as calcium carbonate is high. Calcium carbonate was modified by the complex which was form using starch and stearic acid and the cross linking agent. The preparation technology of modified calcium carbonate and its effects on the paper preperties were studied. The results showed that the best modification conditions are: the dosage of starch is 25% (based on PCC), the concentration of starch is 3.0%, the dosage of steric acid is 4.0%(based on PCC), the dosage of cross linking agent is 1.0%( based on PCC).Under same dosage of filler, the properties of the paper filled with the modified PCC are better than those filled with the unmodified PCC in terms of tensile index,burst index,tear index and brightness.
查看全文  HTML  查看/发表评论  下载PDF阅读器