本文二维码信息
二维码(扫一下试试看!)
3D打印碳纳米管/纳米纤维素复合电极制备及性能
3D Printed Preparation and Properties of Carbon Nanotube/Nanocellulose Composite Electrode
收稿日期:2024-01-12  
DOI:10.11980/j.issn.0254-508X.2024.03.001
关键词:  光固化  3D打印  纳米纤维素  碳纳米管  电极材料
Key Words:light-curable  3D printing  nanocellulose  carbon nanotube  electrode material
基金项目:国家自然科学基金(22078187):热-力耦合作用下合成纤维纸多孔结构内纤维形变行为研究;生物质化学与材料国际联合研究中心(2018GHJD-19);陕西省重点产业创新链项目(2020ZDLGY11-03)。
作者单位邮编
张素风 陕西科技大学轻工科学与工程学院陕西西安710021 710021
王小一 陕西科技大学轻工科学与工程学院陕西西安710021 710021
刘亚丽 陕西科技大学轻工科学与工程学院陕西西安710021 710021
贺鑫宁 陕西科技大学轻工科学与工程学院陕西西安710021 710021
摘要点击次数: 351
全文下载次数: 200
摘要:本研究探索了基于光固化的3D打印技术制造导电聚合物树脂材料。以可光固化树脂和多壁碳纳米管(MWCNT)混合物为基底,通过添加纳米纤维素(CNF)来改善MWCNT的分散性,使混合树脂达到最佳的导电性能和印刷质量。此外,结合了光固化、热解和化学活化等反应过程,形成可设计的分级孔结构的碳电极,该电极具有从毫米级到微米级再到纳米级分布的孔隙结构,组装对称超级电容器可提供高能量密度0.91 mWh/cm2
Abstract:This study explored a visible light-based 3D printing technology for the fabrication of conductive polymer resin materials. A mixture of light-curable resin and multi-walled carbon nanotube (MWCNT) was used as the substrate, and the dispersibility of MWCNT was improved by adding nanocelluloses (CNF) to achieve the best electrical conductivity and printing quality of the hybrid resin. In addition, light curing, pyrolysis, and chemical activation were combined to form carbon electrodes with designable hierarchical pore structures. The electrodes had pore structures with a distribution from millimeter to micron to nanometer scale, and assembled symmetric supercapacitors were provided a high energy density of 0.91 mWh/cm2.
查看全文  HTML  查看/发表评论  下载PDF阅读器