|
二维码（扫一下试试看！） |
| BC@Laccase消减材料优化制备及其去除水体中2-氯苯酚性能评价 |
| Preparation of BC@Laccase Eliminate Material and Its Performance for 2-chlorophenol Removal in Water |
| 收稿日期：2021-01-28 |
| DOI：10.11980/j.issn.0254-508X.2021.06.008 |
| 关键词: 细菌纤维素 固定化技术 漆酶 介体 2-氯苯酚 |
| Key Words:bacterial cellulose immobilization laccase medium 2-chlorophenol |
| 基金项目:浙江省重点研发计划项目（2020C04015）；浙江省自然科学基金面上项目（LY19C160010）；浙江省基础公益研究计划项目（LGF18C160002）；制浆造纸工程国家重点实验室开放基金项目（201758）；杭州市科技计划项目（20191203B28）。 |
|
| 摘要点击次数: 3615 |
| 全文下载次数: 1940 |
| 摘要:本研究采用戊二醛将漆酶（Laccase）固定于细菌纤维素（BC）基材上，通过优化交联工艺，制备环境友好、重复使用的BC@Laccase消减材料；利用场发射扫描电子显微镜（FESEM）、傅里叶变换红外光谱仪（FT-IR）、热重分析仪（TGA）对其进行表征；评价其催化降解水体中2-氯苯酚性能。结果表明，BC@Laccase消减材料的最佳制备工艺条件为：固定时间4 h、固定温度25℃、环境pH值3.5；利用BC@Laccase消减材料对水体中2-氯苯酚进行催化降解，当芥子酸用量4 mmol/L、降解温度30℃、环境pH 值3、降解时间5 h时，对2-氯苯酚降解能力最强，降解率达到76.9%；经过7次循环使用，BC@Laccase消减材料对2-氯苯酚的催化降解能力仍可保持在最初的84.8%以上。 |
| Abstract:In this study， glutaraldehyde was employed to fix laccase on bacterial cellulose （BC） substrate to prepare eco-friendly and reusable BC@Laccase eliminate materials by optimizing the crosslinking condition. FESEM， FT-IR， and TGA were used to characterize the obtained BC@Laccase product. The degradation performance of BC@Laccase on 2-chlorophenol in water was evaluated as well. The results showed that the optimal preparation process for the BC@Laccase was as follows：fixed time 4 h， fixed temperature 25℃， and pH value 3.5. The maximum catalytic degradation rate of 2-chlorophenol in water using BC@Laccase reached 76.9% under the catalytic conditions of erucic acid dosage of 4 mmol/L， degradation temperature of 30℃， pH value of 3， and degradation time of 5 h. Meanwhile， the catalytic degradation ability of BC@Laccase remained higher than 84.8% of its original capability after 7 cycles of use. |
| 查看全文 HTML 查看/发表评论 下载PDF阅读器 |