本文二维码信息
二维码(扫一下试试看!)
用圆网纸机生产高效真空吸尘器纸袋原纸的工艺研究
Study on the Manufacturing Process of Vacuum Dust Collecting Bag Base Paper by Cylinder Paper Machine
收稿日期:  
DOI:10.11980/j.issn.0254-508X.2017.07.004
关键词:  吸尘袋原纸  强度性能  透气性能
Key Words:dust collecting bag base paper  strength properties  air permeability
基金项目:
作者单位
刘文波1,2,3,4 1.天津科技大学天津市制浆造纸重点实验室天津300457
2.中轻特种纤维材料有限公司河北廊坊065001
3.中国制浆造纸研究院北京100102
4.制浆造纸国家工程实验室北京100102 
张红杰1 1.天津科技大学天津市制浆造纸重点实验室天津300457 
苗 红2 2.中轻特种纤维材料有限公司河北廊坊065001 
李海龙1 1.天津科技大学天津市制浆造纸重点实验室天津300457 
许传波2 2.中轻特种纤维材料有限公司河北廊坊065001 
摘要点击次数: 6431
全文下载次数: 1932
摘要:研究了采用圆网纸机生产高效真空吸尘器纸袋原纸的生产工艺。从纤维配比、浆料处理、化学助剂添加、表面施胶工艺及圆网纸机生产实际操作等方面考虑,采用单因素实验探讨各因素对生产高效真空吸尘器纸袋原纸的影响。研究结果表明,用圆网纸机生产高效真空吸尘器纸袋原纸的基本工艺条件为:石头牌南方松针叶木浆和涤纶纤维(12 mm,1.67 dtex)配比为75∶25;浆料只疏解不打浆;湿强剂(PAE)用量为0.6%;表面施胶采用质量比为1∶1的氧化淀粉(OS)与羧甲基纤维素(CMC)的混合胶液,胶液浓度为4%。
Abstract:In this paper, the manufacturing process of efficient vacuum dust collecting bag base paper by using the cylinder paper machine was investigated. Some important parameters were determined, including the fiber type (natural wood fiber and synthetic fiber) and proportion, the mechanical treatment for the fiber materials, the chemical additives, surface sizing process and cylinder paper machine operation conditions. Finally, the optimized conditions for producing this specialty paper were obtained. The results showed that when the ratio of softwood pulp and synthetic fiber was 75∶25, the adding dosage of PAE was 0.6%, the ratio of OS and CMC was 1∶1, and the concentration of sizing agent was 4%, the air permeability and strength properties of dust collecting bag base paper were the best.
查看全文  HTML  查看/发表评论  下载PDF阅读器