|
二维码(扫一下试试看!) |
三维电极-电Fenton法深度处理造纸废水 |
Three-dimensional Electrode-electro Fenton for Advanced Treatment of Papermaking Wastewater |
收稿日期: |
DOI:10.11980/j.issn.0254-508X.2016.07.007 |
关键词: 造纸废水 三维电极 电Fenton 动力学分析 |
Key Words:papermaking wastewater three-dimensional electrode electro-Fenton kinetic analysis |
基金项目:河北省高等学校科学研究计划项目:电-Fenton/砂滤组合工艺应用于造纸废水深度处理回用的可行性研究(Z2015032)。 |
|
摘要点击次数: 6549 |
全文下载次数: 1900 |
摘要:采用三维电极-电Fenton法深度处理造纸二级生化出水,以CODCr去除率为主要考察指标,研究不同因素对废水处理效果的影响,确定最佳处理条件;并对CODCr降解规律进行了反应动力学分析。结果表明,常温下,初始pH值3、电解电压10 V、通气量5.1 L/min、Fe2+浓度0.6 mmol/L、反应时间60 min时,废水中CODCr去除率高达90.5%;在最佳实验条件下,三维电极 电Fenton法氧化降解过程符合准一极反应动力学规律。 |
Abstract:The electro-Fenton method which coupled with three-dimensional electrode was used as advanced treatment for the secondary biological effluent of papermaking wastewater. The paper analyzed the effect of different factors on wastewater treatment result to determine the optimum conditions, the removal rate of CODCr was chosen as the main index for evaluation. The results showed that when the conditions were controlled as follow: at normal temperature, initial pH value 3, electrolysis voltage of 10 V, air flow 5.1 L/min, Fe2+ concentration 0.6 mmol/L, and reaction time of 60 minutes, the removal of CODCr reached to 90.5%.The paper also analyzed the reaction kinetics of CODCr degradation. |
查看全文 HTML 查看/发表评论 下载PDF阅读器 |
|
|
|