本文二维码信息
二维码(扫一下试试看!)
臭氧及催化臭氧氧化法处理制浆废水的研究进展
Research Progress of Pulp Mill Effluent Treatment with Ozonation and Catalytic Ozonation Technology
收稿日期:  
DOI:10.11980/j.issn.0254-508X.2013.05.012
关键词:  制浆废水  臭氧  催化臭氧  有机污染物降解  脱色
Key Words:pulp mill effluent  ozone  catalytic ozonation  degradation of organic pollutant  decoloration
基金项目:本课题得到2011省院全面战略合作重大项目(2011A090100030);国家自然科学基金项目(20776055,20977033)的资助。
作者单位
雷利荣1,2 1.华南理工大学制浆造纸工程国家重点实验室广东广州510640
2.华南理工大学造纸与污染控制国家工程研究中心广东广州510640 
李友明1,2 1.华南理工大学制浆造纸工程国家重点实验室广东广州510640
2.华南理工大学造纸与污染控制国家工程研究中心广东广州510640 
摘要点击次数: 5227
全文下载次数: 1943
摘要:介绍了臭氧及催化臭氧氧化技术降解去除废水中有机物的机理,分析了影响臭氧处理制浆废水效果的主要因素。综述了近年来臭氧及催化臭氧氧化技术处理制浆废水的研究进展;指出此领域尚存在的问题,并对未来的发展方向进行了展望。
Abstract:Ozonation is an environmentally friendly technology for wastewater treatment. Catalytic ozonation technology, based on generation of hydroxyl radical (·OH) with high oxidizing power by synergistic effect of catalyst and ozone molecules, effectively enhances degradation efficiency of organic pollutants existed in wastewater and becomes one of the promising wastewater treatment technologies with practical application potential. In this paper, basic mechanisms of degradation of organic pollutant by ozonation and catalytic ozonation technology were described in detail, and factors which influence treatment efficiency of pulp mill effluent with ozonation were discussed. Moreover, the recent research progress of the pulping effluent treatment with ozonation and ozonation catalytic ozonation technology was reviewed. The existing problems and future development trends about ozonation of pulp mill effluent were presented.
查看全文  HTML  查看/发表评论  下载PDF阅读器