<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005">
<channel xmlns:cfi="http://www.microsoft.com/schemas/rss/core/2005/internal" cfi:lastdownloaderror="None">
<title cf:type="text"><![CDATA[ -->特色纤维原料材性研究]]></title>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Comparative Study on Predictive Modeling of Wood Chip Properties Based on Experimental and Industrial Near Infrared Spectrometer]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202407002&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[In this study， the feasibility of near-infrared （NIR） modeling using an industrial near infrared spectrometer for rapid prediction of wood chips properties was explored and compared with the modeling results of experimental spectrometer. According to the characteristics of different wood properties， the model performance was optimized by spectral signal correction and wavelength screening algorithms， and a suitable modeling method was established. The results showed that the NIR model based on an industrial spectrometer exhibited higher prediction accuracy for physical properties such as moisture， basic density， and fiber length of wood chips， while the prediction accuracy of chemical component content was not significantly different from that of the experimental spectrometer. NIR model of wood chip properties based on industrial spectrometer was suitable for raw material quality evaluation and industrial process analysis.]]></description>
<pubDate>2024/7/22 18:25:39</pubDate>
<category><![CDATA[特色纤维原料材性研究]]></category>
<author><![CDATA[LIANG Long,LYU Nana,WU Ting,DENG Yongjun,SHEN Kuizhong,FANG Guigan]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>LIANG Long,LYU Nana,WU Ting,DENG Yongjun,SHEN Kuizhong,FANG Guigan</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202407002&flag=1]]></guid><cfi:id>2</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Study on the Evolution Process of Fiber Morphology and Structure in the Growth Process of <i>Dendrocalamus Membranaceus Munro</i>]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202407003&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[In this study， the morphology， structure evolution and physical properties of <i>Dendrocalamus Membranaceus</i> <i>Munro</i> fibers during the growth process were studied by field emission scanning electron microscopy and two-dimensional wide-angle X-ray diffractometer. The results showed that when the bamboo age was same， the differentiation and development of the base of bamboo shoots was earlier than that of the upper part. With the increase of bamboo age， the cell wall thickess increased obviously in the first 10 months， and the wall cavity ratio was 0.10 and 4.03 at bamboo age of 3 and 36 months. As the cell wall thickess gradually increased， the fiber became stiff from soft and easy to bend. Observing by field emission scanning electron microscopy， the fiber gradually changed from a flat shape to a multi-prism or an approximate cylinder； the average fiber length and the average width of bamboo fiber increased. At the same bamboo age， the microfibril angle of the fiber gradually increased from the part near the green skin to the part near the inner wall of the bamboo ring， and fluctuated with the increase of the radial height. In the microfibril angle range of 9°~14° ， the fiber orientation was good.]]></description>
<pubDate>2024/7/22 18:25:40</pubDate>
<category><![CDATA[特色纤维原料材性研究]]></category>
<author><![CDATA[QIN Xiao,NI Jingbo,XIAO Yuying,HU Jian,LI Hailong]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>QIN Xiao,NI Jingbo,XIAO Yuying,HU Jian,LI Hailong</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202407003&flag=1]]></guid><cfi:id>1</cfi:id><cfi:read>true</cfi:read></item>
</channel>
</rss>