<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005">
<channel xmlns:cfi="http://www.microsoft.com/schemas/rss/core/2005/internal" cfi:lastdownloaderror="None">
<title cf:type="text"><![CDATA[ -->工程与生产]]></title>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Effect of Lime Particle Size on the Caustic Reaction of Green Liquid in Alkali Recovery and Its Engineering Practice]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202408021&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[In this study， the effects of lime particle size on the digestion and causticization reactions of green liquid in alkali recovery processes were investigated， and industrial practice in the actual production process was explored. The results showed that lime with smaller particles could promote the digestion and causticization reactions of green liquid. As the particle size of lime decreased， the temperature ampufication during the green liquid digestion process increased from 15.0 to 19.0 ℃， the heating time decreased from 240 to 190 s， and the effective calcium oxide content of the digestion slag decreased from 17.8% to 7.2%. The active alkali content of the white liquid after causticization increased from 128.0 to 131.5 g/L， and the causticity degree increased from 76.5% to 78.8%. However， the particle size of white sludge produced after causticization with smaller lime particle size was also small， which was not conducive to the clarification of white liquid， so the lime particle size should be reasonably controlled. In actual production practice， replacing bulk lime with powdered lime simplified the lime system， the active alkali content and causticity of the white liquid were increased by 2.0 g/L and 2.5 percentage points， respectively， and the daily operating cost of the lime system was reduced by 4 980 RMB.]]></description>
<pubDate>2024/8/26 18:52:03</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[ZOU Yuntong,CHENG Xin,CHEN Yuangong,CHEN Qinghan,SHI Leilong,MIAO Qingxian]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>ZOU Yuntong,CHENG Xin,CHEN Yuangong,CHEN Qinghan,SHI Leilong,MIAO Qingxian</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202408021&flag=1]]></guid><cfi:id>14</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Effect of Washing on Oxygen Delignification of Eucalyptus Chemical Pulp]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202408022&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[In this study， the unbleached kraft pulp of eucalyptus from Guangxi was used as raw material， the oxygen delignification reaction was carried out of unbleached pulp with different washing conditions. The effects of different washing degree on the brightness， delignification rate， viscosity reduction rate and paper strength of the oxygen delignification pulp were discussed. The results showed that the washing degree had a great influence on the viscosity of oxygen delignification pulp， and the strength of paper prepared by the oxygen delignification pulp fully washed， especially the folding resistance， has been greatly improved.]]></description>
<pubDate>2024/8/26 18:52:05</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[LU Qinghui,CAO Yanjun,DAI Zhongying,LI Zhi,YANG Yanyu]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>LU Qinghui,CAO Yanjun,DAI Zhongying,LI Zhi,YANG Yanyu</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202408022&flag=1]]></guid><cfi:id>13</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Application of Six Sigma in Optimization of the Dosage of Dry Strength Agent for Production of White Top Linerboard]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202408023&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[The article aimed to reduce the dosage of enhancing auxiliary materials， and explored the methods to decrease the dosage of dry strength agents and improve the pulping and papermaking process in the production of white top linerboard. Six Sigma tool was used to analyze and verify the factors affecting the dosage of dry strength agents， and process parameters were optimized by conducting DOE （Design of Experiments） test designs for key factors， after optimization， there were a reduction of 7 kg of dry strength agents per ton of paper， a cost reduction of 19 RMB per ton of paper， and an annual cost saving of 1 million RMB on the production line.]]></description>
<pubDate>2024/8/26 18:52:07</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[YANG Xue,JIA Wenling,WANG Chao,SHAO Guangyun,XIE Jing,WANG Yi]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>YANG Xue,JIA Wenling,WANG Chao,SHAO Guangyun,XIE Jing,WANG Yi</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202408023&flag=1]]></guid><cfi:id>12</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Application Practice of Membrane Transfer Gluing Process for Cigarette Paper]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202408024&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[In this paper， the film transfer sizing machine equipment structure， working principle， and application and process control in the cigarette paper flux sizing process were introduced. The results showed that the standard deviations of transversal 36 measuring points in full paper sheet were all below 0.15%， when “SC” film transfer sizing machine used in cigarette paper production.]]></description>
<pubDate>2024/8/26 18:52:08</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[TAN Yongtao,HUANG Min,YAO Wen,LIU Yaobin,WANG Pingjun,GU Wenjun,ZHANG Haiyang]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>TAN Yongtao,HUANG Min,YAO Wen,LIU Yaobin,WANG Pingjun,GU Wenjun,ZHANG Haiyang</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202408024&flag=1]]></guid><cfi:id>11</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Operational Efficiency of IC Anaerobic Reactor for OCC Wastewater Treatment]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202408025&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[A new 2 900 m<sup>3</sup> IC anaerobic reactor had been built by an OCC papermaking company， and the anaerobic granular sludge from the same kind of wastewater was introduced. After starting up for 21 d， the IC anaerobic reactor reached the design loading and could treat OCC wastewater for 15 000 m<sup>3</sup>/d with total COD<sub>Cr</sub> for 50 000 kg/d. The COD<sub>Cr</sub> removal rate was 72%~86%， and the VFA of reactor outlet water remained 30~110 mg/L， indicating the new IC anaerobic reactor can improve efficiency in a short time.]]></description>
<pubDate>2024/8/26 18:52:09</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[LI Xionglin,WEI Qingwei]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>LI Xionglin,WEI Qingwei</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202408025&flag=1]]></guid><cfi:id>10</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Sodium Hydroxide Dosage Optimization for Chemi-mechanical Pulp Bleaching Process]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202404022&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[The optimum dosage of sodium hydroxide in bleaching section of poplar chemi-mechanical pulp was studied. When the mass ratio of hydrogen peroxide and sodium hydroxide was 1∶1， the whiteness of pulp was the highest. To improve the strength index of chemi-mechanical pulp， the dosage of sodium hydroxide should be appropriately increased. To improve the bulk and opacity， the dosage of sodium hydroxide should be reduced， in order to prevent the chemi-mechanical pulp from yellowing after a period of time in the pulp storage tower， the residual hydrogen peroxide in the chemi-mechanical pulp should be more than 10% total usage of the hydrogen peroxide in the bleaching section. According to the test results， the bleaching process of chemi-mechanical pulp production line was adjusted and optimized， and the pulp quality reached the expected effect.]]></description>
<pubDate>2024/4/22 15:39:26</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[WANG Hui,MA Xiaoqing,ZHANG Fengshan,WU Weiran,ZHOU Jingpeng,MA Houyue,LIU Yanshao]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>WANG Hui,MA Xiaoqing,ZHANG Fengshan,WU Weiran,ZHOU Jingpeng,MA Houyue,LIU Yanshao</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202404022&flag=1]]></guid><cfi:id>9</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Example of Chromium Removal from Wastewater in a Synthetic Chlorine Dioxide Production System]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202404023&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[In this paper， a new engineering example for the treatment of chromium-containing waste water in pulp and paper mill as the research object， for the intermittent hexavalent chromium（Cr<sup>6+</sup>） comprehensive treatment system that developed by the comprehensive use of self-produced chemicals and existing equipment， the reasons for the generation of Cr<sup>6+</sup> wastewater in the chlorine dioxide workshop and the properties of the wastewater were analysized. Based on the effects of different pH value of reaction pool， reaction temperature， reaction time， and sulfur dosage on the reduction effect of Cr<sup>6+</sup> in wastewater， the optimum reaction conditions of the sulfur dioxide reduction process for removing Cr<sup>6+</sup> were determined， and the reduction effect of Cr<sup>6+</sup> was demonstrated in combination with the actual production data. The results showed that the optimum conditions for the effective removal of Cr<sup>6+</sup> from high concentration chromium-containing wastewater were that pH value of 2~4， reaction temperature of 40~60 ℃， sulfur dosage of 1.4~1.6 times of the theoretical dosage required for the reaction， and reaction time of 40 min. The content of Cr<sup>6+</sup> in the effluent of wastewater from the three shutdowns of chlorine dioxide workshop was lower than 0.005 mg/L， and the content of total chromium was lower than 0.06 mg/L， which were in line with the requirements in the GB 8978—1996， confirming the effectiveness of the treatment of the intermittent Cr<sup>6+</sup> comprehensive treatment system.]]></description>
<pubDate>2024/4/22 15:39:27</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[XIE Qin,LI Liping,CUI Zhaofeng,PAN Shidao]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>XIE Qin,LI Liping,CUI Zhaofeng,PAN Shidao</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202404023&flag=1]]></guid><cfi:id>8</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Application of BIM Forword Design in Pulp and Paper Projects]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202403020&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[Through project cases， the advantages of BIM forward design in pulp and paper projects were analyzed. The process of BIM forward design was streamlined， showcasing the achievements of forward design. Additionally， the introduction of plugins for secondary development had provided great assistance in improving quality， enhancing efficiency， and empowering design of the project. The widespread application of BIM forword design technology provided broad development prospects for the digital transformation of engineering design enterprises.]]></description>
<pubDate>2024/4/11 18:55:38</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[GONG Wei,ZHANG Yi]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>GONG Wei,ZHANG Yi</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202403020&flag=1]]></guid><cfi:id>7</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Determination of Heat Transfer Coefficient of the Building Envelope of the Paper Mill and Analysis of Anti-condensation]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202412022&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[In this study， for the problem of anti-condensation， the heat transfer coefficient of the building envelope of the paper mill was analyzed， and the limit value of the heat transfer coefficient of the building envelope in the wet part of the paper mill in different climatic regions was given under the conditions of indoor temperature of 20 ℃ and indoor relative humidity of ≤75% in winter， in accordance with GB 50176—2016. The results showed that the selection of thermal insulation windows with smaller heat transfer coefficient could play a role in delaying the time of condensation on the external windows. Based on the conditions of condensation in the wet part of the paper mill in different climatic regions， the effectiveness of building envelope heat preservation in preventing condensation in the paper mill was analyzed. It was clarified that the building envelope heat preservation should be combined with ventilation measures in the plant， in order to ensure that the inner surface of the building envelope in the wet part of the paper mill did not condense.]]></description>
<pubDate>2024/12/23 9:08:01</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[LI Na,WANG Shaoming,CHEN Xiaochen,WEI Xin]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>LI Na,WANG Shaoming,CHEN Xiaochen,WEI Xin</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202412022&flag=1]]></guid><cfi:id>6</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Exploration and Control of Odor Issues in White Faced Kraft Cardboard]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202411021&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[White faced kraft cardboard， which is widely used in high-end carton packaging for the food and beverage industry， would severely impact customers’ usage experience if it had an odor issue. Through investigation， this study found that factors such as the pulp temperature in the papermaking system， white water circulation， and the addition of papermaking auxiliaries could all contribute to the production of odors in white faced kraft cardboard. To address the odor problem in white faced kraft cardboard products， one approach was to reduce the temperature in the pulp and papermaking system， enhance the circulatory fluidity of the water and pulp systems in the production process， and disrupt the environment conducive to microbial growth. Another approach was to decrease the addition of high-nitrogen auxiliaries， adjust the raw material structure and optimize the pulping process achieving the physical properties of the base paper， thereby effectively controlling the occurrence of odors.]]></description>
<pubDate>2024/11/22 15:48:52</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[HAN Chenxiao,JIA Wenling,CHANG Yongsheng,LI Xianzhao,WANG Yi]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>HAN Chenxiao,JIA Wenling,CHANG Yongsheng,LI Xianzhao,WANG Yi</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202411021&flag=1]]></guid><cfi:id>5</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Evaluating the Effect of Felt Conditioner Based on the Vacuum Degree of Uhle Boxes]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202411022&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[Firstly，the current felt cleaning and conditioning technology and its’ evaluation methods in the press section of the papermaking machine were briefly reviewed. Then， the feasibility of evaluating the effect of felt conditioner based on the vaccum degree of the uhle boxes of the press-felts displayed on the DCS system of the papermaking machine was discussed with example. And then the cost and economic benefit of felt conditioner were analyzed. Finally， the necessity of using the felt conditioner and the importance of strengthening the monitoring of felts in the press section were summarized.]]></description>
<pubDate>2024/11/22 15:48:52</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[JIN Xingming]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>JIN Xingming</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202411022&flag=1]]></guid><cfi:id>4</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Development Path Analysis of Digital Transformation and Intelligent Manufacturing Upgrade in Pulp and Paper Industry]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202511027&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[This paper systematically analyzed the background， core development trends， and key implementation paths for promoting digital transformation and intelligent manufacturing upgrade in the pulp and paper industry. It delved into the challenges currently faced by the industry and proposes feasible solutions. Based on a comprehensive study of the industry’s current situation， key technologies， implementation strategies， potential risks， and future trends， the paper innovatively proposed the concept of establishing a static data center during the project investment and construction phase through digital delivery， and building a dynamic data center for production operations <i>via</i> a data middle office， thereby forming a closed loop of the data value chain throughout the entire lifecycle of engineering projects.]]></description>
<pubDate>2025/11/25 12:54:55</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[LIU Gang,NI Zhengqing]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>LIU Gang,NI Zhengqing</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202511027&flag=1]]></guid><cfi:id>3</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Energy-saving Optimization and Application Practice of Compressed Air System for Papermaking Enterprises]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202511028&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[As the core power source in the production process of household paper enterprises， the energy consumption of compressed air systems has become increasingly prominent. This paper took a large household paper enterprise as an example and analyzed the existing problems in its compressed air system， including equipment efficiency， drying system configuration， and intelligent control. In response to these issues， a hierarchical optimization plan had been proposed， including measures such as the adoption of high-efficiency permanent magnet variable frequency air compressors， zero-gas-consumption compression heat dryers， and intelligent control systems. After optimization and upgrading， the average specific power of the system decreased from 7.9 kW/(m<sup>3</sup>·min) to 5.6 kW/(m<sup>3</sup>·min)， achieving an energy-saving rate of 29.1%. The annual electricity savings reached 5.002 million kWh， generating annual benefits of 3.501 million yuan， with significant energy-saving and economic benefits.]]></description>
<pubDate>2025/11/25 12:54:56</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[WU Daxu,LI Wenbin,LI Defang,LIN Yahui,WANG Yulong]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>WU Daxu,LI Wenbin,LI Defang,LIN Yahui,WANG Yulong</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202511028&flag=1]]></guid><cfi:id>2</cfi:id><cfi:read>true</cfi:read></item>
<item>
<title xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="text"><![CDATA[Key Design Points for Comprehensive Chlorine Dioxide Preparation Technology]]></title>
<link><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202511029&flag=1]]></link>
<description xmlns:cf="http://www.microsoft.com/schemas/rss/core/2005" cf:type="html"><![CDATA[This paper introduced the reaction principle， process， and automatic control design points of the comprehensive chlorine dioxide preparation technology from three production units： Sodium chlorate preparation， hydrochloric acid synthesis， and chlorine dioxide production. The current status of the comprehensive method for preparing chlorine dioxide was summarized.]]></description>
<pubDate>2025/11/25 12:54:56</pubDate>
<category><![CDATA[工程与生产]]></category>
<author><![CDATA[ZHAO Shiyan]]></author>
<atom:author xmlns:atom="http://www.w3.org/2005/Atom">
<atom:name>ZHAO Shiyan</atom:name>
</atom:author>
<guid><![CDATA[http://zgzz.ijournals.cn/zgzzen/ch/reader/view_abstract.aspx?file_no=202511029&flag=1]]></guid><cfi:id>1</cfi:id><cfi:read>true</cfi:read></item>
</channel>
</rss>